Using a tan paint wash on a Cherry Wood 🍒 Dresser

This is the fourth and final piece of a set I did for a friend! Her father-in-law made this cherry wood 🍒 dresser and she wanted a lighter more modern version. My plan was to use a tan paint wash and it did not disappoint.

before picture of an 8 drawer cherry dresser

Products:

Tools used:

How I refinished this piece:

*When scrolling through the Instagram posts on your desktop, click on the black slide to start and pause the videos*

Step by step intructions:

💃🏽 Sprayed Stripwell’s QCS Finish Remover, waited 15 minutes, sprayed again and then used a putty knife to remove
🏝️ Sanded flat surfaces with my Dewalt random orbit sander using 100 grit and smoothed with 150
🏖️ Used my Surfprep 3×4 electric ray sander to remove the finish from the edges; I started with a 100 grit film and then smoothed with a medium 5mm profoam pad and then a fine 5mm profoam pad; also did some hand sanding for the hard to reach areas and did some hand sanding
🎨 💦 With Country Chic Paint’s Sunday Tea, made a paint wash that was 1 part paint, 3 parts water
🖌️ Applied liberally in all directions with Country Chic Paint’s 2” oval brush and removed excess with shop towel
🦭 Applied Zinsser Sealcoat – a dewaxed shellac that helps the surface not turn pink when the water based topcoat is applied; I tested this on the headboard and there wasn’t a difference when it was applied first
🦭 Sealed everything with General Finishes High-Performance Topcoat in Satin
👴🏻 Finished drawers with Grandpa Ernie’s method; let me know if you need a further explanation 😉
🪛 Reinstalled the hardware

Knowing that my friend’s can trust me with their family heirlooms is not something I take lightly. This set, that was once a wedding gift, now has been given a modern refresh but maintaining the shape and character!


Leave a Reply

Discover more from Kristin Lia Restoration

Subscribe now to keep reading and get access to the full archive.

Continue reading