This is the second piece of a set I did for a friend! Her father-in-law made these cherry 🍒 nightstands and she wanted a lighter more modern version. My plan was to use a tan paint wash and it did not disappoint.

before image of a cherry wood nightstand

Tools used:

How I refinished this piece:

*When scrolling through the Instagram posts on your desktop, click on the black slide to start and pause the videos*

after image of a set of cherry wood nightstands that have been stripped of their original finish and finished using a tan paint wash

Step by step intructions:

  1. 💃🏽 Sprayed Stripwell’s QCS Finish Remover, waited 15 minutes, sprayed again and then used a putty knife to remove
  2. 🏝️ Sanded flat surfaces with my Dewalt random orbit sander using 100 grit and smoothed with 150
  3. 🏖️ Used my Surfprep 3×4 electric ray sander to remove the finish from the edges; I started with a 100 grit film and then smoothed with a medium 5mm profoam pad and then a fine 5mm profoam pad; also did some hand sanding for the hard to reach areas and did some hand sanding
  4. 🎨 💦 With Country Chic Paint’s Sunday Tea, made a paint wash that was 1 part paint, 3 parts water
  5. 🖌️ Applied liberally in all directions with Country Chic Paint’s 2” oval brush and removed excess with shop towel
  6. 🦭 Applied Zinsser Sealcoat – a dewaxed shellac that helps the surface not turn pink when the water based topcoat is applied; I tested this on the headboard and there wasn’t a difference when it was applied first
  7. 🦭 Sealed everything with General Finishes High-Performance Topcoat in Satin
  8. 👴🏻 Finished drawers with Grandpa Ernie’s method; let me know if you need a further explanation 😉

This set has been given a new life! Stay tuned for the next couple of pieces 🎶


I'd love to know what you think!

Trending

Discover more from Kristin Lia Restoration

Subscribe now to keep reading and get access to the full archive.

Continue reading